Zte ZXA10 C300 - Configuring the LTM Function

Chapter17OAMConguration
ZXAN(config-md1-ma1)#primaryvlan100
Note:
IntheEthernetOAMMDsofthesamelevel,primaryVLANofMAsisunique.
6.CreatelocalEthernetOAMMEP.
ZXAN(config-md1-ma1)#createmepsession11directiondown
7.AssignlocalMEPtotheuplinkport.
ZXAN(config-md1-ma1)#assignmep1tointerfacegei_1/21/1
8.EnabletheMEP .
ZXAN(config-md1-ma1)#mep1stateenable
9.ConguretheremoteMEP .
ZXAN(config-md1-ma1)#creatermepsession22remote-mac00d0.d058.6958
10.ConguretheuplinkportVLANoflocalMEP .
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#switchportvlan100tag
ZXAN(config-if)#end
11.Inadministratormode,carryouttheLBMfunction.
ZXAN#cfmlbmcheckunicastmd1ma1smep-id1dmep-id2
–EndofSteps–
Result
IntheCLIwindow,amessageshowsthatwhetherthedestinationMEP(orMIP)is
reachable.
17.1.3ConfiguringtheLTMFunction
TheLTMfunctionisusedtotracethelinkbetweentwoMEPs.
Context
WhenyoucarryouttheLinkTraceMessage(LTM)functiononanMEP,theMEPsends
LTMpacketstotracethepathtothedestinationMACaddress.MIPsforwardthemessages
untilthemessagesarrivethedestinationMEPorthemessagescannotbeforwardedany
more.WhenMPsonthepathreceivetheLTMpackets,eachMPrespondstothesource
MEPwithanLTRmessage.WhenthedestinationisanMIP,theMIPdoesnotforwardthe
LTManymore.
17-5
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential