Zte ZXA10 C300 - Page 268

ZXA10C300CongurationManual(CLI)
Steps
1.EnabletheCFMfunction.
ZXAN(config)#cfmenable
2.CreatetheEthernetOAMMD.
ZXAN(config)#cfmcreatemdsession1namemd1level3
3.CreatetheEthernetOAMMA.
ZXAN(config-md1)#createmasession1formaticc-basednamema1
4.ConguretheMAprotectionmode.
ZXAN(config-md1-ma1)#protectvlan
Note:
OnlyVLANprotectionmodeisvalid.
5.ConguretheMAprimaryVLAN.
ZXAN(config-md1-ma1)#primaryvlan100
Note:
IntheEthernetOAMMDsofthesamelevel,primaryVLANofMAsisunique.
6.CreatelocalEthernetOAMMEP.
ZXAN(config-md1-ma1)#createmepsession11directiondown
7.AssignlocalMEPtotheuplinkport.
ZXAN(config-md1-ma1)#assignmep1tointerfacegei_1/21/1
8.EnabletheMEP .
ZXAN(config-md1-ma1)#mep1stateenable
9.ConguretheremoteMEP .
ZXAN(config-md1-ma1)#creatermepsession22remote-mac00d0.d058.6958
10.ConguretheuplinkportVLANoflocalMEP .
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#switchportvlan100tag
ZXAN(config-if)#end
11.Intheadministratormode,carryouttheLTMfunction.
ZXAN#cfmltmmd1ma1smep-id1dmep-id2
–EndofSteps–
17-6
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential