Zte ZXA10 C300 - Configuring CTLA 1+1 Protection

ZXA10C300CongurationManual(CLI)
Note:
TheZXA10C300supportsthefollowingtwoportattributes:
lCommon-port:commonport
lTrunking-port:linkaggregationport
6.(Optional)QuerytheUAPSgroupconguration.
ZXAN(cfg-uaps-1)#showuapsgroupid1
Revertivecontrol:enable
PortLightcontrol:disable
Protect-time:400s
Next-hop:0.0.0.0
Bfdnext_hop:0.0.0.0
Link-type:normal
Link-detect-retry:5
Link-detect-interval:3
Linkstatus:connectedorNA
BfdLinkstatus:connectedorNA
Switch-type:commonport
Masterportsstatus:forwarding
gei_1/21/1:down
Slaveportsstatus:block
gei_1/21/2:down
–EndofSteps–
12.3ConguringCTLA1+1Protection
Thissectiondescribeshowtoimplement1+1protectionontheuplinkTDMoptical
interface.
Prerequisite
TheCESservicehasbeencongured.
Context
CTLA1+1protectionrequirestwoCTLAcards.Theworkingcardisconnectedtothepeer
SDHastheworkingchannel,andtheprotectioncardisconnectedtothepeerSDHasthe
protectionchannel.
TheworkprincipleofCTLA1+1protectionisasfollows:
12-6
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential