Zte ZXA10 C300 - Configuring the VPWS

Chapter16MPLSServiceConguration
7.ConguretheLDPtargetsession.
ZXAN(config)#mplsldptarget-session2.2.2.2
8.ConguretheVC.
ZXAN(config)#pw2and1000pw
ZXAN(config-pw)#modedynamicpwe3fec128
ZXAN(config-pw)#pwtypeethernet-vlan
ZXAN(config-pw)#peer2.2.2.2router-id2.2.2.2vcid1000
ZXAN(config-pw)#exit
9.ConguretheVFI.
ZXAN(config)#vfihvpls-vfi
ZXAN(config-vfi)#mplsxconnectpw2and1000pw
ZXAN(config-vfi)#exit
10.Conguretheclassmap.
ZXAN(config)#class-mapclassmap1000
ZXAN(config-cmap)#matchsvlan-id1000
ZXAN(config-cmap)#exit
11.ConguretheCIP .
ZXAN(config)#cip1
ZXAN(config-cip1)#service-typeethernetclass-mapclassmap1000
ZXAN(config-cip1)#xconnecthvpls-vfi
ZXAN(config-cip1)#exit
12.Savethecongurationdata.
Result
ThesethreeONUscanpingeachothersuccessfully.
16.3ConguringtheVPWS
VPWSissuitableforapplicationsbasedonATMorFRconnection.
BackgroundInformation
TheVPWSisoneoftheL2VPNapplication.VPWSusesVLLstoprovideEthernetbased
pointtopointcommunicationoverIP/MPLSnetworks.VLLusesthePWencapsulationfor
transportingEthernettrafcoveranMPLStunnelacrossanIP/MPLSbackbone.
NetworkingDiagram
Figure16-15showsthenetworkingdiagramoftheVPWS.
16-47
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential