Zte ZXA10 C300 - Configuring the Dial Plan; Configuring the GPON SIP Profile; Table 2-10 Configuration Data of the GPON SIP Profile

Chapter2GPON/XG-PONServiceConguration
2.8ConguringtheDialPlan
Adialplanestablishestheexpectednumberandpatternofdigitsforatelephonenumber,
whichincludescountrycodes,accesscodes,areacodesandallcombinationsofdigits
dialed.
Steps
1.InGPONcongurationmode,createthedialplan.
ZXAN(config)#gpon
ZXAN(config-gpon)#onuprofiledial-plantest
2.Congurethedigit-mapofthedialplan.
ZXAN(config-gpon)#onuprofiledial-plantestdigit-mapX*.X.#|#X.*.X.##
3.(Optional)Querythedialplanconguration.
ZXAN(config-gpon)#showgpononuprofiledial-plantest
Profilename:test
Criticaltimeout:4000
Partialtimeout:16000
Format:H.248
Digitmap:X*.X.#|#X.*.X.##
–EndofSteps–
2.9ConguringtheGPONSIPProle
UsingtheGPONSIPprole,youcanconguretheGPONONUSIPparametersforGPON
ONUsinbatches.
Prerequisite
Beforethisoperation,makesurethat:
lTheaccesscodeprolehasbeencongured.
lTheserviceapplicationprolehasbeencongured.
lThedialplantablehasbeencongured.
CongurationData
Table2-10liststhecongurationdataoftheSessionInitiationProtocol(SIP)prole.
Table2-10CongurationDataoftheGPONSIPProle
ItemData
Prolenamesip-test
Accesscodeproleabc
Serviceapplicationprolevoip-service
2-13
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential