Zte ZXA10 C300 - Configuring DSCP to Cos Remarking; Configuring the Default Egress Cos

ZXA10C300CongurationManual(CLI)
Steps
1.Inglobalcongurationmode,conguretheCoSremarkingprole.
ZXAN(config)#qoscos-to-cos-profiletestcos03
2.InONUinterfacecongurationmode,applytheCoSremarkingprole.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#qoscoscos-remarktestvport1
ZXAN(config-if)#qostrustcosvport1
3.(Optional)QuerytheQoScongurationontheinterface.
ZXAN(config-if)#showqosinterfacegpon-onu_1/5/1:1
qoscoscos-remarkTESTvport1
–EndofSteps–
7.3.4ConfiguringDSCPtoCoSRemarking
UsingtheDSCP-to-CoSremarkingprole,theONUvirtualport(vport)modiespacket’s
CoSpriorityaccordingtoitsDSCPvalue.
Context
WhenthevporttrustsDSCP,theCoSinpacketsismodiedaccordingtothemapping
relationintheproleaftertheDSCPremarkingproleiscongured.
Steps
1.Inglobalcongurationmode,conguretheDSCP-to-CoSremarkingprole.
ZXAN(config)#qosdscp-to-cos-profiletest12to3
2.InONUinterfacecongurationmode,applytheDSCP-to-CoSremarkingprole.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#qoscosdscp-remarktestvport1
ZXAN(config-if)#qostrustdscpvport1
3.(Optional)QuerytheQoScongurationontheinterface.
ZXAN(config-if)#showqosinterfacegpon-onu_1/5/1:1
qostrustdscpvport1
qoscosdscp-remarkTESTvport1
–EndofSteps–
7.3.5ConfiguringtheDefaultEgressCoS
WhenthedefaultCoSiscongured,theONUvirtualport(vport)addsthedefaultegress
CoStotheuntaggedpacket.
7-10
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential