Zte ZXA10 C300 - Adding a User; Table 1-9 User Properties Description

Chapter1BasicConguration
PrivilegeLevelDescription
2–9Whentheuserlogsinandenterstheadministratormode,hecan
usethecommandsoflevel0–9.
10–15Whentheuserlogsinandenterstheadministratormode,hecan
usethecommandsoflevel0–15.
Theusercanmanagesuseraccounts.
•Auserwhoseprivilegelevelis0canonlyusethecommandsoflevel0.
•Auserwhoseprivilegelevelis1canonlyusethecommandsoflevel0–1.
•Auserwhoseprivilegelevelis2canonlyusethecommandsoflevel0–2,andsoon.
•Auserwhoseprivilegelevelis15canonlyusethecommandsoflevel0–15.
1.5.1AddingaUser
Whenyouaddauser,youneedtocongureuserproperties,includingtheusername,
passwordandprivilege.
Context
Table1-9describesuserproperties.
Table1-9UserPropertiesDescription
PropertyDescription
Username1–16printablecharacters(nospace),casesensitive
TheusernamemustbeuniqueontheZXA10C300.
Password8–32characters,shouldcontaincharactersfromatleastthree
categories:lower-case,capitals,digitsorspecialcharacters.
Max-sessionMaximumsessionnumber,1–16
Privilege0–15
TheZXA10C300supportsmaximum20users.
ThedefaultuserontheZXA10C300iszte,whosepasswordisZTEzte123,andthe
privilegeis1.
Steps
1.Addauser.
ZXAN(config)#usernameabcpasswordAbc12345privilege10
2.(Optional)Querytheuserconguration.
ZXAN(config)#showusername
cliuserglobalconfiguration
-----------------------------------------------------------------------
namesessionspriOperStatuslogin-beginlogin-endexpire-date
1-21
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential