Zte ZXA10 C300 - Resetting a Card; Swapping the Active;Standby Switching and Control Cards

ZXA10C300CongurationManual(CLI)
ZXAN(config)#del-cardslotno15
Confirmtodeletecard?[yes/no]:y
3.(Optional)Querythecardconguration.
ZXAN(config)#showcard
RackShelfSlotCfgTypeRealTypePortHardVerSoftVerStatus
-----------------------------------------------------------------------------
110PRWGPRWG0INSERVICE
111PRWGPRWG0INSERVICE
1110SCXNSCXN4120900V2.0.0INSERVICE
1111SCXNSCXN4120900V2.0.0STANDBY
1121GUSQGUSQ4090200V2.0.0INSERVICE
–EndofSteps–
1.3.7ResettingaCard
Youcanresetthecardtorectifyafaultorclearanalarm.Forexample,whentheZXA10
C300reportsan"abnormalcardstate"alarm,youcanclearthealarmbyresettingthecard.
Steps
1.Inadministratormode,resetthecard.
ZXAN#reset-cardslotno15
Confirmtoresetcard?[yes/no]:y
–EndofSteps–
1.3.8SwappingtheActive/StandbySwitchingandControlCards
Whentheactiveswitchingandcontrolcardisfaulty,youcanswitchtheservicetothe
standbyswitchingandcontrolcardtoensurenormalservicebyswappingtheactiveand
standbyswitchingandcontrolcards.
Steps
1.Inadministratormode,swaptheactiveandstandbyswitchingandcontrolcards.
ZXAN#swap
Confirmtomasterswap?[yes/no]:y
1-14
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential