Zte ZXA10 C300 - Configuring Queue Mapping

Chapter7QoSConguration
2.InONUinterfacecongurationmode,applythequeueblockprole.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#qosqueue-block-profiletestvport1
3.(Optional)QuerytheQoSqueueblockprole.
ZXAN(config-if)#showqosqueue-block-profiletest
-----------------------------------------------------------------
profilename:TEST
profiledetail:
-----------------------------------------------------------------
queue-number:8
queue-weight:23000000
queue-depth:1212000000
-----------------------------------------------------------------
profileusedby:
gpon-onu_1/5/1:1:1
–EndofSteps–
7.3.10ConfiguringQueueMapping
Usingthequeuemapprole,youcanimplementqueuemappingontheONUvirtualport
(vport).
Steps
1.Inglobalcongurationmode,congurethequeuemapprole.
ZXAN(config)#qosqueue-map-profiletestcos-queue-typecos02
2.InONUinterfacecongurationmode,applythequeuemapprole.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#qosqueue-map-profiletestvport1
3.(Optional)QuerytheQoSqueuemapprole.
ZXAN(config-if)#showqosqueue-map-profiletest
--------------------------------------------------------------
profilename:TEST
profiledetail:
----------------------------------------
queue-map:cos-queue-type
queue-number:8
cos-value:01234567
cos-queue-map:21234567
----------------------------------------
profileusedby:
gpon-onu_1/5/1:1:1
–EndofSteps–
7-13
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential