Zte ZXA10 C300 - Configuring DSCP-Cos Remarking; Configuring the Drop Precedence

ZXA10C300CongurationManual(CLI)
7.1.2ConfiguringDSCP-CoSRemarking
UsingtheDSCP-to-CoSremarkingprole,youcanremarkthepacketCoSpriority
accordingtotheitsDSCPvalue.
Steps
1.Inglobalcongurationmode,conguretheDSCP-to-CoSremarkingprole.
ZXAN(config)#qosdscp-to-cos-profiletest3to6
2.InEthernetinterfacemode,applytheDSCP-to-CoSremarkingprole.
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#qoscosdscp-remarktest
3.ConguretrustDifferentiatedServicesCodePoint(DSCP)ontheinterface.
ZXAN(config-if)#qostrustdscp
4.(Optional)QuerytheQoScongurationontheinterface.
ZXAN(config-if)#showqosinterfacegei_1/21/1
qoscosdscp-remarkTEST
qostrustdscp
5.(Optional)QuerytheCoSremarkingprole.
ZXAN(config-if)#showqosdscp-to-cos-profiletest
------------------------------------------------------------
profilename:TEST
profiledetail:
------------------------------------------------------------
dscplist0123456789101112131415
cosvalue0006000011111111
------------------------------------------------------------
dscplist16171819202122232425262728293031
cosvalue2222222233333333
------------------------------------------------------------
dscplist32333435363738394041424344454647
cosvalue4444444455555555
------------------------------------------------------------
dscplist48495051525354555657585960616263
cosvalue6666666677777777
profileusedby:
gei_1/21/1
–EndofSteps–
7.1.3ConfiguringtheDropPrecedence
UsingtheDSCP-to-dropprole,youcanremarkthepacketdropprecedenceaccordingto
theitsDSCPvalue.
7-2
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential