Zte ZXA10 C300 - Deleting a Card

Chapter1BasicConguration
Steps
1.Queryallthecards.
ZXAN#showcard
RackShelfSlotCfgTypeRealTypePortHardVerSoftVerStatus
-----------------------------------------------------------------------------
110PRWGPRWG0INSERVICE
111PRWGPRWG0INSERVICE
1110SCXNSCXN4120900V2.0.0INSERVICE
1111SCXNSCXN4120900V2.0.0STANDBY
1115GTGOGTGOG8120301V2.0.0INSERVICE
1121GUSQGUSQ4090200V2.0.0INSERVICE
2.Queryacertaincard.
ZXAN#showcardslotno10
Config-Type:SCXNStatus:INSERVICE
Port-Number:4
Cpu-Alarm-Threshold:100%
Mem-Alarm-Threshold:100%
Real-Type:SCXNSerial-Number:269644400040
Phy-Mem-Size:1024MBMain-CPU:PowerPCProcessor
PCB-VER:120900
Cpld-VER:V1.4Fpga-VER:
OtherfirewareVER:
BootROM-VER:V4.0.02013-03-2210:50:14
Software-VER:V2.0.02013-05-1715:06:01
Cpu-Usage:18%
Mem-Usage:36%
Uptime:6Days,7Hours,23Minutes,42Seconds
–EndofSteps–
1.3.6DeletingaCard
Whenreplacingacardwithanothercardofdifferenttype,youneedtodeletetheexisting
cardbeforeaddinganewcard.
Steps
1.Enterglobalcongurationmode.
ZXAN#configureterminal
Enterconfigurationcommands,oneperline.EndwithCTRL/Z.
ZXAN(config)#
2.Deletethecard.
1-13
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential