Zte ZXA10 C300 - Enabling the Pnp Function; Table 1-4 Card Configurations for a 21-Inch Shelf

Chapter1BasicConguration
Table1-4describesthecardcongurationsfora21-inchshelf.
Table1-4CardCongurationsfora21-InchShelf
SlotNumberCardType
0/1Powercard
2–9PONinterfacecard,TDMinterfacecard,Ethernetinterfacecard,and
P2Pinterfacecard
10/11Switchingandcontrolcard
12–19PONinterfacecard,TDMinterfacecard,Ethernetinterfacecard,and
P2Pinterfacecard
20Commoninterfacecard
21/22Uplinkcard
Steps
1.Enterglobalcongurationmode.
ZXAN#configureterminal
Enterconfigurationcommands，oneperline.EndwithCTRL/Z.
ZXAN(config)#
2.Addcards.
ZXAN(config)#add-cardslotno15GTGO
ZXAN(config)#add-cardslotno21GUSQ
3.(Optional)Querythecardconguration.
ZXAN(config)#showcard
RackShelfSlotCfgTypeRealTypePortHardVerSoftVerStatus
-----------------------------------------------------------------------------
110PRWGPRWG0INSERVICE
111PRWGPRWG0INSERVICE
1110SCXNSCXN4120900V2.0.0INSERVICE
1111SCXNSCXN4120900V2.0.0STANDBY
1115GTGOGTGOG8120301V2.0.0INSERVICE
1121GUSQGUSQ4090200V2.0.0INSERVICE
–EndofSteps–
1.3.4EnablingthePnPFunction
TheZXA10C300supportstheplugandplay(PnP)functionofthecard.Bydefault,the
PnPfunctionoftheZXA10C300isenabled.
Steps
1.Inglobalcongurationmode,enablethePnPfunction.
ZXAN#configureterminal
1-11
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential