Zte ZXA10 C300 - Configuring the LBM Function

Chapter17OAMConguration
Note:
TheZXA10C300supportssevenintervals:
l1:3.3ms
l2:10ms
l3:100ms
l4:1s
l5:10s
l6:1min
l7:10min
7.CreatelocalEthernetOAMMEP .
ZXAN(config-md1-ma1)#createmepsession11directiondown
8.AssignlocalMEPtotheuplinkport.
ZXAN(config-md1-ma1)#assignmep1tointerfacegei_1/21/1
9.EnabletheMEP .
ZXAN(config-md1-ma1)#mep1stateenable
10.ConguretheremoteMEP .
ZXAN(config-md1-ma1)#creatermepsession22remote-mac00d0.d058.6958
11.EnabletheCCM-sendfunctiononlocalMEP .
ZXAN(config-md1-ma1)#mep1ccm-sendunicastenable
12.ConguretheuplinkportVLANoflocalMEP .
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#switchportvlan100tag
–EndofSteps–
Result
IftheZXA10C300receiveserrorCCMpacketsordoesnotreceiveanyCCMpackets,
therewillbeaCCMalarminformationontheNMS.YoucanquerytheCCMalarm
informationusingtheshowcfmmpallmd1ma1detailcommand.
17.1.2ConfiguringtheLBMFunction
TheEthernetLBM,whichisanoptionalOAMfunction,isusedtocheckthebidirectional
continuitybetweenanMEPandanMIP ,orbetweenanMEPtooneormultipleMEPs.
CongurationData
Table17-2listthecongurationdataoftheLoopbackMessage(LBM)function.
17-3
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential