Zte ZXA10 C300 - Configuring the GPON Voice Service (H.248)

Chapter2GPON/XG-PONServiceConguration
4.InONUinterfacecongurationmode,conguretheserviceportVLAN.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#service-port3vport3user-vlan300vlan300
ZXAN(config-if)#exit
Note:
Bydefault,themappingmodebetweenthevirtualportandtheGEMportis1:1.
5.InONUremotemanagementmode,conguretheservicechannel.
ZXAN(config)#pon-onu-mnggpon-onu_1/5/1:1
ZXAN(gpon-onu-mng)#servicevoip-sipgemport3cos7vlan300
6.(Optional)ConguretheVoIPprotocoltype.
ZXAN(gpon-onu-mng)#voipprotocolsip
7.ConguretheVoIPaddress.
ZXAN(gpon-onu-mng)#voip-ipmodestaticip-profileip-testip-address1.2.3.4
mask255.255.255.0vlan-profilevlan-test
8.ConguretheVoIPservice.
ZXAN(gpon-onu-mng)#sip-servicepots_0/1profilesip-testuserid12345username
12345password12345
ZXAN(gpon-onu-mng)#end
9.Savethecongurationdata.
ZXAN#write
–EndofSteps–
2.14ConguringtheGPONVoiceService(H.248)
AfteryouconguretheGPONvoiceservice,subscriberscanmakeandanswerphone
calls.ThissectiontakestheH.248protocolasanexample.
Prerequisite
lTheGPONONUhasbeenauthenticated.
lTheT-CONTbandwidthprolehasbeencongured.
lTheGPONVoIPIPprolehasbeencongured.
lTheGPONVoIPVLANprolehasbeencongured.
lTheGPONMGCprolehasbeencongured.
CongurationData
Table2-15liststhecongurationdataoftheGPONvoiceservice.
2-25
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential