Zte ZXA10 C300 - Adding a Shelf

Chapter1BasicConguration
ZXAN(config)#
2.Addtherack.
ZXAN(config)#add-rackrackno1racktypeETSI21
Note:
TheZXA10C300supportsonlyonerackcurrently,andthusracknocanonlybe1.
3.(Optional)Querytherackconguration.
ZXAN(config)#showrack
RackRackTypeSupShelfNumCfgShelfNum
--------------------------------------------------------------------
1ETSI2111
Note:
‘SupShelfNum’isthemaximumshelfnumbersupportedbytherack.
–EndofSteps–
1.3.2AddingaShelf
WhencommissioningtheZXA10C300,youneedtoaddashelfinarack.
Prerequisite
Therackhasbeenadded.
Context
TheZXA10C300supportsthefollowingtwotypesofshelves:
lETSI_SHELF:21-inchshelf
lIEC_SHELF:19-inchshelf
Steps
1.Enterglobalcongurationmode.
ZXAN#configureterminal
Enterconfigurationcommands,oneperline.EndwithCTRL/Z.
ZXAN(config)#
2.Addtheshelf.
1-9
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential