Zte ZXA10 C300 - Configuring the NDP Line Identification Option (NDP-LIO); Table 14-4 Configuration Data of Dhcpv6 L2 Ra

ZXA10C300CongurationManual(CLI)
CongurationData
Table14-4liststhecongurationdataofDHCPv6L2RA.
Table14-4CongurationDataofDHCPv6L2RA
ItemData
DHCPv6L2RAVLANlVLAN:100
lStatus:enable
DHCPv6L2RAinterfacelInterface:gpon-onu_1/5/1:1
lVirtualport:1
lDHCPv6L2RAstatus:enable
Steps
1.EnableDHCPv6L2RAonVLAN.
ZXAN(config)#dhcpv6-l2-relay-agentvlan100enable
//VLAN100istheservicevlanaftervlan-translation.
2.InGPON-ONUinterfacemode,congureDHCPv6L2RAonthevirtualport.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#dhcpv6-l2-relay-agentenablevport1
ZXAN(config-if)#exit
3.(Optional)QueryeithertheglobalDHCPv6L2RAstatusorDHCPv6L2RAstatuson
VLAN(mutuallyexclusive).
ZXAN(config)#showdhcpv6-l2-relay-agentvlanall
vlantotal:1
vlanlist:100
4.(Optional)QuerytheinterfacecongurationofDHCPv6L2RA.
ZXAN(config)#showdhcpv6-l2-relay-agentportgpon-onu_1/5/1:1vport1
PortPvcdhcpv6-l2-relay-agentstatusTrustPolicy
gpon-onu_1/5/1:11enablefalseadd
–EndofSteps–
Result
WhenthesubscribersendsDHCPv6protocolpackets,thesystemaddsthefollowingelds
tothepackets:
Option18:ZXA10-C300/ZTEeth5/1/1/0/1:10
Option37:REMOTE-ID
//where,10isoriginaluserVLAN.
14.1.5ConfiguringtheNDPLineIdentificationOption(NDP-LIO)
WhenNDP-LIOisenabled,theZXA10C300addsLIOeldtotheupstreamNDPpackets.
14-6
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential