Zte ZXA10 C300 - Table 11-2 Configuration Data of DHCP Server

Chapter11DHCPConguration
Table11-2CongurationDataofDHCPServer
ItemData
GlobalDHCPstatusenable
IPaddresspoollName:ippool1
lRange:10.10.1.3–10.10.1.254
DHCPIPaddresspoollName:dhcppool1
lIPpool:ippool1
lDNSIPaddress:10.10.1.2
lIPaddressleaseperiod:innite
lDefaultroute:10.10.1.254
DHCPpolicylName:dhcppy
lPriority:1
lDHCPIPaddresspool:dhcppool1
DHCPserverlIPaddress:10.10.1.1
lMode:server
lPolicy:dhcppy
Steps
1.EnabletheglobalDHCPfunction.
ZXAN(config)#ipdhcpenable
2.ConguretheIPaddresspoolforDHCPclients.
ZXAN(config)#ippoolippool1
ZXAN(config-ip-pool)#range10.10.1.310.10.1.254255.255.255.0
ZXAN(config-ip-pool)#exit
3.ApplytheIPaddresspooltotheDHCPIPaddresspool.
ZXAN(config)#ipdhcppooldhcppool1
ZXAN(config-dhcp-pool)#ip-poolippool1
4.ConguretheleasetimeoftheIPaddresses.
ZXAN(config-dhcp-pool)#lease-timeinfinite
5.ConguretheDHCPDNSserver.
ZXAN(config-dhcp-pool)#dns-server10.10.1.2
6.Congurethedefaultroute.
ZXAN(config-dhcp-pool)#default-router10.10.1.254
ZXAN(config-dhcp-pool)#exit
7.ConguretheDHCPpolicy.
ZXAN(config)#ipdhcppolicydhcppy1
ZXAN(config-dhcp-policy)#dhcp-pooldhcppool1
ZXAN(config-dhcp-policy)#exit
8.Inmanagementinterfacemode,conguretheDHCPmodeandpolicy.
11-3
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential