Zte ZXA10 C300 - NM Configuration; Configuring the In-Band NM; Table 1-1 Configuration Data of the In-Band NM

Chapter1BasicConguration
1.2NMConguration
TheZXA10C300supportsin-bandNMandout-of-bandNM.
lInin-bandNMmode,theZXA10C300accessestheIPnetworkviatheservicechannel
(uplinkport)totransmitNMinformation.Thein-bandNMmodeisusuallyusedin
practicalengineering.
lInout-of-bandNMmode,theZXA10C300accessestheNMSviathe10/100Mport
ontheswitchingandcontrolcard.Thenon-servicechannelisusedtotransmitthe
managementinformationsothatthemanagementchannelandservicechannelare
separated.Theout-of-bandNMmodeisusuallyusedinlocalmanagementandmain-
tenance.
1.2.1ConfiguringtheIn-BandNM
Inin-bandNMmode,theNMinformationistransmittedviatheservicechannelofthe
equipment.Thein-bandNMmodesupportsexiblenetworkingandrequiresnoadditional
equipment.
Prerequisite
Beforethisoperation,makesurethat:
lYouhaveloggedintotheZXA10C300throughHyperTerminalandentered
administratormode.
lTheuplinkcardhasbeenadded.(Referto1.3.3AddingaCard.)
CongurationData
Table1-1liststhecongurationdataofthein-bandNM.
Table1-1CongurationDataoftheIn-BandNM
ItemData
Uplinkportgei_1/21/1
In-bandNMVLANVLANID:1000
In-bandNMIPaddress10.1.1.1/24
NexthopIPaddress10.1.1.254/24
NMserver(SNMPserver)IPaddress:10.2.1.1/24
Version:V2C
Communityname:public
Alarmlevel:notications
UDPport:162
Steps
1.Enterglobalcongurationmode.
ZXAN#configureterminal
1-5
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential