Zte ZXA10 C300 - Page 282

ZXA10C300CongurationManual(CLI)
ItemData
ClocktypeSYNCE
Priority1
ClockSSMvalueQL-SEC
PONport1/5/1
Steps
1.Querythecurrentclocksource.
ZXAN(config)#showclocksourceactive
interface:1/10/0
type:internal
ssm-ql:qlsec
status:free_run
warning:none
operation:none
2.Inclockcongurationmode,conguretheclocksource.
ZXAN(config)#clock
ZXAN(config-clock)#source1/21/1typesyncEpriority1
Note:
Whenmultipleclocksourcesarecongured,thesystemwillselectoneclocksource
accordingtothefollowingcriteria:
lTheclockstatusisproper.
lTheclockpriorityisthehighest.
lTheclockqualityisthebest.
lTheclockisconguredearlier.
Priorityrangeisdenedfrom1to250.1isdenedasthehighestpriority.
3.ConguretheSSMvalueoftheclocksource.
ZXAN(config-clock)#ssm-set1/21/1qlsec
4.(Optional)EnabletheESMContheuplinkport.
ZXAN(config-clock)#switchesmcset1/21/1
5.ConguretheSSMvaluesentbythePONport.
ZXAN(config-clock)#ssm-send1/5/1qlsec
6.EnabletheESMConthePONport.
ZXAN(config-clock)#switchesmcset1/5/1
7.(Optional)Switchtheclocksource.
19-2
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential