Zte ZXA10 C300 - Page 56

ZXA10C300CongurationManual(CLI)
4.InONUinterfacemode,conguretheserviceportVLAN.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#service-port2vport2user-vlan200vlan200
ZXAN(config-if)#exit
Note:
Bydefault,themappingmodebetweenthevirtualportandtheGEMportis1:1.
5.(Optional)EnableIGMPglobally.
ZXAN(config)#igmpenable
6.ConguretheportIGMPparameters.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#igmpfast-leaveenablevport2
ZXAN(config-if)#exit
7.ConguretheMVLAN.
ZXAN(config)#igmpmvlan200
8.(Optional)ConguretheMVLANworkingmode.
ZXAN(config)#igmpmvlan200work-modeproxy
9.ConguretheMVLANmulticastgroup.
ZXAN(config)#igmpmvlan200group224.1.1.1to224.1.1.3
10.CongureMVLANsourceport.
ZXAN(config)#igmpmvlan200source-portgei_1/22/1
11.ConguretheMVLANreceiveport.
ZXAN(config)#igmpmvlan200receive-portgpon-onu_1/5/1:1vport2
12.InONUremotemanagementmode,conguretheservicechannel.
ZXAN(config)#pon-onu-mnggpon-onu_1/5/1:1
ZXAN(gpon-onu-mng)#servicemulticastgemport2cos5vlan200
13.ConguretheuserportMVLAN.
ZXAN(gpon-onu-mng)#mvlan200
ZXAN(gpon-onu-mng)#mvlantag-stripeth_0/2enable
14.ConguretheuserportVLAN.
ZXAN(gpon-onu-mng)#vlanporteth_0/2modetagvlan200pri5
ZXAN(gpon-onu-mng)#end
15.Savethecongurationdata.
ZXAN#write
–EndofSteps–
2-22
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential