Chapter 7 Connection Status
VMG/EMG/AM/DM/GM Series User’s Guide
173
System Uptime This field displays how long the Zyxel Device has been running since it last started up. The
Zyxel Device starts up when you plug it in, when you restart it (Maintenance > Reboot), or
when you reset it.
ProvisioningCode This field displays the verification code sent by your ISP (Internet Service Provider). The TR-069
server uses the code to verify the Zyxel Device.
Encapsulation This field displays the current encapsulation method.
IP Subnet Mask This field displays the current subnet mask in the WAN.
MAC Address This field displays the WAN Ethernet adapter MAC (Media Access Control) address of your
Zyxel Device.
Primary DNS
server
This field displays the first DNS server address assigned by the ISP.
Secondary DNS
server
This field displays the second DNS server address assigned by the ISP.
Primary DNSv6
server
This field displays the first DNS server IPv6 address assigned by the ISP.
Secondary
DNSv6 server
This field displays the second DNS server IPv6 address assigned by the ISP.
LAN Information
IP Address This is the current IP address of the Zyxel Device in the LAN.
Subnet Mask This is the current subnet mask in the LAN.
IPv6 Address This is the current IPv6 address of the Zyxel Device in the LAN.
IPv6 Link Local
Address
This field displays the current link-local address of the Zyxel Device for the LAN interface.
A link-local address is a special type of the IP address that is only valid for communication
within the local network segment or broadcast domain of the device. Typically, link-local
addresses are used for automatic address configuration and neighbor discovery protocols.
DHCP This field displays what DHCP services the Zyxel Device is providing to the LAN. The possible
values are:
Server – The Zyxel Device is a DHCP server in the LAN. It assigns IP addresses to other
computers in the LAN.
Relay – The Zyxel Device acts as a surrogate DHCP server and relays DHCP requests and
responses between the remote server and the clients.
Disable – The Zyxel Device is not providing any DHCP services to the LAN.
Security
Firewall This displays the firewall’s current security level (High, Medium, Low, or Disabled).
WLAN Information
MAC Address This shows the WiFi adapter MAC (Media Access Control) Address of the WiFi interface.
Status This displays whether the WLAN is activated.
SSID This is the descriptive name used to identify the Zyxel Device in a WLAN.
Channel This is the channel number currently used by the WiFi interface.
Security This displays the type of security mode the WiFi interface is using in the WLAN.
802.11 Mode This displays the type of 802.11 mode the WiFi interface is using in the WLAN.
WPS This displays whether WPS is activated on the WiFi interface.
System Resources
Memory Usage This displays the current RAM usage percentage.
CPU Usage This displays the current CPU usage percentage.
Table 26 System Info: Detailed Information (continued)
LABEL DESCRIPTION
To Next Page
Loading...
