Chapter 26 Voice
VMG/EMG/AM/DM/GM Series User’s Guide
382
26.4.1 Provider Entry Add/Edit
Use this screen to configure the SIP server information, the numbers for certain phone functions and
dialing plan for a SIP service provider.
Click the Modify icon next to a profile of SIP service provider settings in the VoIP > SIP > SIP Service
Provider to open the following screen.
Note: Click this () to see all the fields in the screen. You do not necessarily need to use all
these fields to set up your account. Click again to see and configure only the fields
needed for this feature.
REGISTER Server Address This shows the IP address or domain name of the SIP register server.
SIP Service Domain Enter the SIP service domain name. In the full SIP URI, this is the part after the
@symbol. You can use up to 127 printable ASCII Extended set characters.
Modify Click the Edit icon to configure the SIP service provider.
Click the Delete icon to delete this SIP service provider from the Zyxel Device.
Table 132 VoIP > SIP > SIP Service Provider
LABEL DESCRIPTION
To Next Page
Loading...
