Chapter 25 Certificates
VMG/EMG/AM/DM/GM Series User’s Guide
369
The following table describes the labels in this screen.
25.5 Import Trusted CA Certificate
Click Import Certificate in the Trusted CA screen to open the Import Certificate screen. The Zyxel Device
trusts any valid certificate signed by any of the imported trusted CA certificates. Certificates should be in
one of the following formats: Binary X.509, PEM (base-64) encoded, Binary PKCS#7, or PEM (base-64)
encoded PKCS#7.
Note: You must remove any spaces from the certificate’s filename before you can import the
certificate.
Figure 215 Security > Certificates > Trusted CA > Import Certificate
Table 127 Security > Certificates > Trusted CA
LABEL DESCRIPTION
Import Certificate Click this to open a screen where you can save the certificate of a certification authority that
you trust to the Zyxel Device.
# This is the index number of the entry.
Name This field displays the name used to identify this certificate.
Subject This field displays information that identifies the owner of the certificate, such as Common
Name (CN), OU (Organizational Unit or department), Organization (O), State (ST) and Country
(C). It is recommended that each certificate have a unique subject information.
Type This field displays general information about the certificate. ca means that a Certification
Authority signed the certificate.
Modify Click the View icon to open a screen with an in-depth list of information about the certificate
(or certification request).
Click the Remove icon to delete the certificate (or certification request). You cannot delete a
certificate that one or more features is configured to use.
To Next Page
Loading...
