Chapter 12 Quality of Service (QoS)
VMG/EMG/AM/DM/GM Series User’s Guide
292
12.7.1 Add or Edit a QoS Policer
Click Add New Policer in the Policer Setup screen or the Edit icon next to a policer to show the following
screen.
Figure 161 Network Setting > QoS > Policer Setup > Add New Policer/Edit
The following table describes the labels in this screen.
Action This shows how the policer has the Zyxel Device treat different types of traffic belonging to the
policer’s member QoS classes.
Modify Click the Edit icon to edit the policer.
Click the Delete icon to delete an existing policer. Note that subsequent rules move up by one
when you take this action.
Table 82 Network Setting > QoS > Policer Setup (continued)
LABEL DESCRIPTION
Table 83 Network Setting > QoS > Policer Setup > Add New Policer/Edit
LABEL DESCRIPTION
Active Click this switch to enable the policer.
Name Enter a descriptive name for this policer. You can use up to 16 printable characters except [ " ], [
` ], [ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ]. Spaces are allowed.
To Next Page
Loading...
