Chapter 46 Troubleshooting
VMG/EMG/AM/DM/GM Series User’s Guide
475
46.8 UPnP Problems
My computer cannot detect UPnP settings from the Zyxel Device.
1 Make sure that UPnP is enabled in your computer. For Windows 10, see Section 10.12 on page 386.
2 On the Zyxel Device, make sure that UPnP is enabled on the Network Settings > Home Networking >
UPnP screen. See Section 10.4 on page 374 for details.
3 Disconnect the Ethernet cable from the Zyxel Device’s Ethernet port or from your computer.
4 Reconnect the Ethernet cable.
5 Restart your computer.
46.9 Getting More Troubleshooting Help
Search for support information for your model at https://service-provider.zyxel.com/global/en/tech-
support and community.zyxel.com for more troubleshooting suggestions.
To Next Page
Loading...
