Chapter 7 Connection Status
VMG/EMG/AM/DM/GM Series User’s Guide
174
7.1.5 WiFi Settings
Use this screen to enable or disable the main WiFi network. When the switch turns blue, the function is
enabled. You can use this screen or the QR code on the upper right corner to check the SSIDs (WiFi
network name) and passwords of the main WiFi networks. If you want to show or hide your WiFi
passwords, click the Eye icon ( ).
Figure 75 WiFi Settings
Click the Arrow icon ( ) to configure the SSIDs and/or passwords for your main WiFi networks. Click the
Eye icon ( ) to display the characters as you enter the WiFi Password.
Scanning the QR code is an alternative way to connect your WiFi client to the WiFi network.
Select Keep 2.4G and 5G the same to use the same SSID for 2.4 GHz and 5 GHz bands.
Note: When you enable MPro Mesh in the Network > Wireless > MESH screen, Keep 2.4G, 5G
and 6G the same will be enabled and cannot be disabled.
To Next Page
Loading...
