Chapter 8 Broadband
VMG/EMG/AM/DM/GM Series User’s Guide
204
Figure 99 Network Setting > Broadband > Advanced
Note: This screen only shows if you’re using the VMG/GM series devices.
The following table describes the labels in this screen.
Table 42 Network Setting > Broadband > Advanced
LABEL DESCRIPTION
DSL Capabilities
PhyR US Enable or disable PhyR US (upstream) for upstream transmission to the WAN. PhyR US should be
enabled if data being transmitted upstream is sensitive to noise. However, enabling PhyR US can
decrease the US line rate. Enabling or disabling PhyR will require the CPE to retrain. For PhyR to
function, the DSLAM must also support PhyR and have it enabled.
PhyR DS Enable or disable PhyR DS (downstream) for downstream transmission from the WAN. PhyR DS
should be enabled if data being transmitted downstream is sensitive to noise. However,
enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will require the CPE
to retrain. For PhyR to function, the DSLAM must also support PhyR and have it enabled.
To Next Page
Loading...
