Chapter 42 Log Setting
VMG/EMG/AM/DM/GM Series User’s Guide
448
Figure 260 Maintenance > Log Setting
The following table describes the fields in this screen.
Table 171 Maintenance > Log Setting
LABEL DESCRIPTION
Syslog Settings
Syslog Logging Slide the switch to the right to enable syslog logging.
Mode Select Remote to have the Zyxel Device send it to an external syslog server.
Select Local File to have the Zyxel Device save the log file on the Zyxel Device itself.
Select Local File and Remote to have the Zyxel Device save the log file on the Zyxel Device itself
and send it to an external syslog server.
Note: A warning appears upon selecting Remote or Local File and Remote. Just click
OK to continue.
Syslog Server Enter the server name or IP address of the syslog server that will log the selected categories of
logs.
UDP Port Enter the port number used by the syslog server.
E-mail Log Settings
To Next Page
Loading...
