Chapter 14 Pass Through
N4100 User’s Guide
145
Please enter new pass through for subscribers or LAN devices (up to 50 entries)
Start / End IP
Address
Select this option to allow packets from computers with a specific range
of IP addresses to pass through the N4100 without entering a user name
and password.
Enter the beginning and ending IP addresses IP addresses in dotted
decimal notation, for example, 192.168.1.10.
IP Address Select this option to allow packets from a computer with a specific IP
address to pass through the N4100 without entering a user name and
password. You can specify a range of IP addresses on a network by
specifying an IP address here and a subnet mask in the Subnet Mask
field.
Enter the IP address in dotted decimal notation, for example,
192.168.1.10.
Subnet
Mask
Enter the subnet mask of the IP address that you entered in the IP
Address field.
MAC Address Select this option to allow packets from a computer with a specific MAC
address to pass through the N4100 without entering a user name and
password.
Enter the MAC address of a computer (in 6 hexadecimal pairs separated
by a hyphen “-“, for example, 00-50-BA-8D-22-96).
Mask Enter the subnet mask of the MAC address that you entered in the MAC
Address field.
Description Enter a descriptive name of up to 20 ASCII characters for this entry.
Add to List Click this button to add the pass through entry you configured to the
Pass Through List.
Pass Through
List
This table displays the device and web site address entries that you have
set up on the N4100.
No. This read-only field displays the index number of a pass through entry.
Active Select this check box to turn on this pass through entry and allow access
without a user name and password.
Clear this check box to turn off this pass through entry and block access
without a user name and password.
Address List This read-only field displays the address(es) of a pass through entry.
Type This read-only field displays “Destination” for a pass through entry based
on a destination URL or IP address.
The field displays “Subscriber/LAN device” for a pass through entry based
on a LAN device or a subscriber’s computer.
Click the column heading to sort the pass through entries by type
(Destination or Subscriber/LAN device).
Description This read-only field displays the name of a pass through entry.
Delete Select this check box(es) and click Apply to remove the pass through
entry.
Delete All Click this button to remove all of the pass-through entries.
Apply Click Apply to save your changes back to the N4100.
Table 29 ADVANCED > PASS THROUGH
LABEL DESCRIPTION
To Next Page
Loading...
