DECT Intercom
When the handset is registered to the phone successfully, you can place/receive a DECT intercom call to/from
the
handset registered to your phone.
Topics
Configuring Auto Intercom
Placing a DECT Intercom Call on the Handset
Placing a DECT Intercom Call on the Phone
Placing a DECT Intercom Call with a DECT Intercom Key
Performing a Blind Transfer to the Handset
Merging the DECT Intercom Call with SIP Call into a Conference
Configuring Auto Intercom
You can configure the phone to automatically answer an incoming internal intercom call and play a warning tone.
The following types of warning tones are available:
l
On (Beep On): The phone answers an incoming internal intercom call automatically and plays a warning tone.
l
On (Beep Off): The phone answers an incoming internal intercom call automatically without a warning tone.
l
Off: Auto intercom feature is off. You need to answer an incoming internal intercom call manually.
Procedure
1.
Swipe left or right to go to the second/third idle screen.
2.
Go to DECT Settings > Auto Intercom.
3.
Select a desired option from the Auto Intercom field.
4.
Tap .
Note
: Your system administrator can configure the auto intercom feature for your phone and the registered handsets at the
same time.
Placing a DECT Intercom Call on the Handset
You can place a DECT intercom call to a handset registered to the same phone or place a DECT intercom call
to
the phone that you register the handset to.
Up to two intercom calls can be set up on the handset.
Procedure
1. Go to OK > Intercom.
The phone screen displays the names of all registered headsets and the All Handsets option.
2.
Highlight the desired handset or phone.
3.
Press OK to dial out.
Related Topics
Handset Registration
Placing a DECT Intercom Call on the Phone
Placing a DECT Intercom Call on the Phone
You can place a DECT intercom call to a handset registered to the phone.
Procedure
1.
Go to
( ) > DECT Intercom.
The phone screen displays the names of all registered headsets.
To Next Page
Loading...
Need help?
General