2N D7A User Manual

176
2.
Tap the desired handset.
The corresponding handset will ring.
Related Topics
Handset Registration
Placing a DECT Intercom Call on the Handset
Placing a DECT Intercom Call with a DECT Intercom Key
You can quickly dial a handset registered to your phone through the DECT Intercom key.
Procedure
1.
Swipe left or right to go to the second idle screen.
2.
Go to Settings > Features > Dsskey.
3.
Tap the desired line key.
4.
Select DECT Intercom from the Type field.
5.
Select a target handset from the Select handset field.
6.
(Optional.) Enter the string that will appear on the phone screen in the Label field.
7.
Tap .
8.
Place a DECT intercom call by tapping a DECT Intercom key when the phone is idle.
Tip : You can drag the line key to the Edit field to set a DECT Intercom key.
Performing a Blind Transfer to the Handset
You can quickly transfer a SIP call to the handset registered to your phone.
Procedure
1.
When the phone is during a call, do one of the following:
l Drag the far-site window to a DECT Intercom key.
l
Tap Transfer.
Go to ( ) > DECT
Intercom. Tap the desired handset.
Related Topic
Placing a DECT Intercom Call with a DECT Intercom Key
Merging the DECT Intercom Call with SIP Call into a Conference
You can merge the current DECT intercom call with a SIP call into a conference.
Procedure
1.
Place a DECT intercom call and a SIP call on the phone.
2.
Do one of the following:
l Drag one far-site window to the other far-site window.
Tap Conference from the pop-up box.
l Tap the desired call for a conference and ensure that the call is active.
Tap Conference.
Tap the Hold call to join the conference.

2N D7A Specifications

General

Brand	2N
Model	D7A
Category	IP Phone
Language	English