2N D7A User Manual

89
Video/Voice Mail
Voice mail feature allows you to leave voice/video mails for someone or listen to your voice/video mail
messages on your phone. This feature is set up on the server side and not all servers support this feature.
To send video mails, you need to connect a USB camera to the phone in advance. The usage of video mail is
the same as that of voice mail, the following takes voice mail as an example.
Topics
Setting the Voice Mail
Code Leaving Voice Mails
Listening to Voice Mails
Setting the Voice Mail Code
If you want to connect your phone to the message center, you need to set the voice mail code on your phone.
Before You Begin
Get the voice mail code from your system administrator.
Procedure
1.
Swipe left or right to go to the second idle screen.
2.
Select ( ) to launch Message.
3.
Select Set Voice Mail Code.
4.
Enter the voice mail code (for example, *4) in the desired account field.
5.
Select .
Leaving Voice Mails
You can leave a voice mail to someone who is busy or inconvenient to answer the call.
Procedure
1.
Follow the voice prompts to leave a voice mail.
2.
Hang up to complete the voice mail.
Listening to Voice Mails
You can listen to your voice mails on the phone, to obtain a voice information sent by a contact.
Before You Begin
You need to set the voice mail code in advance.
Procedure
1.
Swipe left or right to go to the second idle screen.
2.
Select ( ) to launch Message.
3.
Select View Voice Mail.
The phone screen displays the amount of new and old voice mails. You can tap the account to listen to
voice mails.
Tip : When The phone prompts that the phone receives a new voice mail, you can press the MESSAGE key ( )
or select Connect to dial out the voice mail access code directly.
Related Topic
Setting the Voice Mail Code

2N D7A Specifications

General

Brand	2N
Model	D7A
Category	IP Phone
Language	English