2N D7A User Manual

97
Director
y
Tap the desired contact and then select .
3.
Edit the blocklist contact information.
4.
Select or OK.
Deleting Blocklist Contacts
You can delete one or all blocklist contacts. If a contact is removed from the blocklist, you can answer the call
from the contact normally.
Topics
Deleting a Blocklist Contact
Deleting All Blocklist Contacts
Deleting a Blocklist Contact
If you want to answer a call from a specific contact, you need to remove it from the Blocklist.
Procedure
1.
Tap ( ) > Blocklist.
2.
Select after the desired blocklist contact.
tap the desired blocklist contact and then select .
3.
Select Delete.
The phone prompts you to delete the contact or not.
4.
Select OK.
Deleting All Blocklist Contacts
You can delete all contacts from the Blocklist when you are ready to answer calls from them again.
Procedure
1.
Go to ( ) > Blocklist.
2.
Tap Settings > Select All.
tap > Select All.
3.
Select .
The phone prompts you to delete all contacts or not.
4.
Select OK.
Moving a Blocklist Contact to the Local Directory
You can move a blocklist contact to a Local Directory. Incoming calls from this contact will not be rejected
auto- matically.
Procedure
1.
Tap ( ) > Blocklist.
2.
Select after the desired blocklist contact.
tap the desired contact and then select

2N D7A Specifications

General

Category	IP Phone
Model	2N D7A
Humidity	10% to 90% non-condensing
Audio Codecs	G.711, G.722, G.729
Network Interface	10/100 Mbps Ethernet
Power Supply	PoE or external power adapter
Features	HD audio
Protocols	SIP, RTP, RTCP
Operating Temperature	0 to 40 °C