2N D7A User Manual

55
Performing Transfer with a Transfer Key
Performing a Blind Transfer
You can transfer a call to another contact immediately without consulting with her/him first.
Topics
Performing a Blind Transfer Normally
Performing a Blind Transfer Conveniently
Performing a Blind Transfer Normally
You can enter the number or select a contact from directory or history to perform a blind transfer.
Procedure
1.
Press the TRANSFER key or select Transfer during a call.
2.
Do one of the following:
l
Enter the number you want to transfer the call to, and press the TRANSFER
key
or select Transfer(
).
Select Transfer to complete the transfer. (The call will automatically dial out in about 5 seconds if you do
not select Transfer.)
l
Select (Local Directory), and select the desired contact to complete the transfer.
l
Select (Local Calls), and select the desired list. Select the desired entry to complete the transfer.
Procedure
You can do one of the following:
l When there is an active call for the account which is related with the speed dial or BLF key. Drag the far-site
window to that speed dial or BLF key.

2N D7A Specifications

General

Brand	2N
Model	D7A
Category	IP Phone
Language	English