Topics
State Indicator of the Intercom key
Placing an Intercom Call
Picking up an Incoming Call of the Target
Extension
Answering an Intercom Call
State Indicator of the Intercom key
You can get the intercom status by viewing the icon indicator of the Intercom key.
Placing an Intercom Call
You can place an intercom call to quickly relay a message to a contact.
The target phone plays a warning tone and automatically answers the call in speakerphone (hands-free) mode
by default. When the target phone has an active call, the intercom call is answered automatically after the
active call
ends.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Go to Settings > Features > Dsskey.
3.
Select the desired line key.
4.
Select Intercom from the Type field.
5.
Select the desired line from the Account ID field.
6.
Do one of the following:
l
(Optional.) Enter the string that will appear on the phone screen in the Label field.
Enter the target extension number in the Value field.
l
Select
and select the desired contact.
7. Select .
8.
Tap the Intercom key to place an intercom call.
Tip
: By default, you can drag the line key to the
Edit
field to set it.
Related Topic
Setting a BLF Key
Picking up an Incoming Call of the Target Extension
You can pick up the target extension's incoming call by pressing the Intercom key.
Before picking up an incoming call, make sure that the directed call pickup code has been configured either
for an
Intercom key or for Call Pickup feature in advance.
Check with your system administrator to find out if this feature is available on your phone.
Note
: If the directed call pickup code is not set, the phone will place a call to the target extension instead of picking up
an
incoming call of the target extension when you tap the Intercom key.
To Next Page
Loading...
Need help?
General