2N D7A - Renaming the Handset; Locating a Handset; Changing Base PIN

182
Renaming the Handset
You can personalize the handset name on the phone.
Procedure
1.
Swipe left or right to go to the second/third idle screen.
2.
Go to DECT Settings > Handsets.
3.
Tap beside the handset name.
4.
Enter the desired handset name.
5.
Select OK.
Locating a Handset
You can locate a misplaced registered handset by the phone.
Procedure
1.
Swipe left or right to go to the second/third idle screen.
2.
Go to DECT Settings > Handsets.
3.
Tap Start Paging.
All handsets that are registered to the phone will ring (paging) simultaneously and display the IP address
of the phone on the screen.
You can tap Stop Paging on the phone to end ringing (paging).
Changing Base PIN
To avoid unauthorized registration or access to some features on the phone, you should keep the base PIN
secret.
Procedure
1.
Swipe left or right to go to the second/third idle screen.
2.
Go to DECT Settings > Change Base PIN.
3.
Enter the current PIN (default: 0000) in the Change Base PIN field.
4.
Enter the new PIN in the Enter New PIN and the Re-enter new PIN fields.
5.
Tap .
Note : If the double PIN feature is enabled by your system administrator, you can only use the registration PIN to
register a handset. Contact your system administrator for more information.