2N D7A - Setting a Paging Group; Sending Pages by a Paging List Key; Deleting a Paging Group

68
4. Select Key Event from the Type field.
5. Select Paging List from the Key Type field.
6. (Optional.) Enter the string that will display on the phone screen in the Label field.
7. Select .
Tip : By default, you can drag the line key to the Edit field to set it.
Setting a Paging Group
You can edit the information of the paging group.
Before You Begin
A Paging List key is set in advance. Get the multicast IP address and port number from your system administrator.
Procedure
1.
Tap the Paging List key when the phone is idle.
2.
Select after the desired paging group.
The default tag is Empty if it is not configured before.
3.
Enter the multicast IP address and port number (for example, 224.5.6.20:10008) in the Address field.
4.
Enter the string that will display on the phone screen in the Label field.
5.
Enter the desired channel between 0 and 30 in the Channel field.
6.
Select .
7.
To set more paging groups, repeat steps 2 to 6.
Sending Pages by a Paging List Key
You can send a paging by using the Paging List key when the phone is idle.
Before You Begin
You need to set a Paging List key in advance.
Procedure
1.
Tap the Paging List key when the phone is idle.
2.
Select the desired paging group.
Both your phone and receiver’s phone play a warning tone and the multicast RTP session will be
automatically answered on the receiver’ s phone in the speakerphone (hands-free) mode.
Related Topic
Setting a Paging List Key
Deleting a Paging Group
You can delete any group from the paging group list.
Procedure
1.
Tap the Paging List key when the phone is idle.
Go to Settings > Features > Paging List.
If the Paging List key is not configured, you can also swipe left or right to go to the second idle screen.
And then go to Settings > Features > Paging List to configure the paging list.
2.
Select after the desired paging group.
3.
Select Delete.