2N D7A User Manual

57
3.
Do one of the following:
l
When you hear the ringback tone, press the TRANSFER key or select Transfer to finish the semi-
atten– ded transfer.
l
After the contact answers the call, press the TRANSFER key or select Transfer to finish the
attended transfer (consultative transfer).
Tip : If you are using a handset, the transfer can be completed by hanging up the handset.
Performing Transfer with a Transfer Key
By default, you can transfer a call to a specific contact directly using a Transfer key during a call.
Your system administrator can also set your phone to perform attended transfer when using a Transfer key.
Topics
Setting a Transfer Key
Performing a Blind Transfer Using a Transfer Key
Performing a Semi-attended/Attended Using a Transfer Key
Performing a Call Transfer by Selecting a Transfer Mode
Setting a Transfer Key
You can set a line key as a Transfer key and specify a contact you want to transfer a call to for this key.
Procedure
1. Swipe left or right to go to the second idle screen.
2. Go to Settings > Features > Dsskey.
3. Select the desired line key.
4. Select Key Event from the Type field.
5. Select Transfer from the Key Type field.
6. Do one of the following:
l
(Optional.) Enter the string that will appear on the phone screen in the Label field.
Enter the contact number you want to transfer the call to in the Value field.
l
Select and select the desired contact.
7. Select .
Tip : By default, you can drag the line key to the Edit field to set it.
Performing a Blind Transfer Using a Transfer Key
After you have set a Transfer key with a specific contact, you can perform a blind transfer by using it.
Before You Begin
Confirm with your system administrator that the transfer mode has set to perform a blind transfer.
Procedure
1.
Tap the Transfer key during a call.
The call is transferred to the specific contact directly.
Related Topic
Setting a Transfer Key

2N D7A Specifications

General

Brand	2N
Model	D7A
Category	IP Phone
Language	English