Repeater Mode
Repeater mode extends the radio coverage of the phone. The repeater has the same radio coverage as the
base
station.
This feature is especially useful for users who require mobility in large dwellings. If the repeater mode is
enabled,
and a repeater is registered to the base station, the handset registered to the base station can be
used either in the
base station or the repeater coverage area, thereby providing users with greater freedom in
mobility.
Topics
Enabling the Repeater Mode
Setting the Phone to the Repeater Registration Mode
Registering a Repeater
Enabling the Repeater Mode
You have to enable the repeater mode before you register a repeater.
Procedure
1.
Swipe left or right to go to the second/third idle screen.
2.
Go to DECT Settings > Repeater Mode.
3.
Select a repeater from the Repeater Mode field.
4.
Tap .
The phone prompts you to reboot the dongle or not.
5.
Tap OK.
The repeater mode is enabled after the dongle reboot.
Setting the Phone to the Repeater Registration Mode
After enabling the repeater mode, you have to set the phone to the repeater registration mode.
Procedure
1.
Swipe left or right to go to the second/third idle screen.
2.
Go to DECT Settings > Handsets.
3.
Tap Register Repeater.
The phone is in the repeater registration mode now.
Related Topic
Enabling the Repeater Mode
Registering a Repeater
You need to register a repeater if you want to extend the radio coverage of the phone.
Before You Begin
The repeater mode is enabled, and the phone is in the repeater registration mode.
Procedure
1.
Plug the repeater into an AC outlet.
POWER LED glows green and DECT LED flashes red.
2.
Enable the repeater registration mode on the phone.
If a phone is found, DECT LED will flash orange.
To Next Page
Loading...
Need help?
General