2N D7A User Manual

58
Performing a Semi-attended/Attended Using a Transfer Key
After you have set a Transfer key with a specific contact, you can perform a semi-attended/attended transfer by
using it.
Before You Begin
Confirm with your system administrator that the transfer mode has set to perform attended transfer.
Procedure
1.
Tap the Transfer key during a call.
The phone calls the specific contact first. Wait until you hear the ringback tone or until the contact answers
the call.
2.
Tap the Transfer key again.
Related Topic
Setting a Transfer Key
Performing a Call Transfer by Selecting a Transfer Mode
During the call, you can press the Transfer key to select a transfer mode.
Before You Begin
You need to set a Transfer key for a specific contact. Check with your system administrator to find out if this call
transfer feature is available on the phone.
Procedure
1.
Press the Transfer key during a call, the phone screen is shown below:
2.
Select the desired transfer mode.
Related Topic
Setting a Transfer Key
Conference Calls
The phone supports creating local conference and network conference.
During the conference, follow these tips:
l Use the handset or a headset if you're in an open environment.
l Mute your microphone when you are not speaking, especially in noisy environments.

2N D7A Specifications

General

Brand	2N
Model	D7A
Category	IP Phone
Language	English