ABB AC 800M

Section 4 Configuration Configuring LD 800DN Linking Device Unit
9ARD000014-600 A 113
Electronic
Key Product
Typ e
Enum 0 1 Editable Criteria that can be specified by user
for LD 800DN to accept connection
from CI873 only when Product Type
of LD 800DN configured in Control
Builder matches with the Product
Type of LD 800DN device in the
network.
Values are:
Enable Keying, Disable Keying
Upon modification, connection
between LD 800DN and CI873 gets
disconnected and connected again.
Hence communication with
DeviceNet slaves stop momentarily
Electronic
Key Product
Code
Enum 0 1 Editable Criteria that can be specified by user
for LD 800DN to accept connection
from CI873 only when Product code
of LD 800DN configured in Control
Builder matches with the Product
code of LD 800DN device in the
network.
Values are:
Enable Keying, Disable Keying
Upon modification, connection
between LD 800DN and CI873 gets
disconnected and connected again.
Hence communication with
DeviceNet slaves stop momentarily
Table 17. Settings for LD 800DN Linking Device Unit (Continued)
Parameter Data Type Unit Min Max
Editable
/Read
Only
Description