ABB AC 800M

Appendix A Troubleshooting EDS File
238 9ARD000014-600 A
59 Product Description
should be aplha
numeric text
If the product
description field is
not an
alphanumeric text
EtherNet/IP/
DeviceNet
Continue the import
with this message
after specifying
correct syntax.
60 You cannot uncheck
the devices that
were enabled during
the first import.
Unchecking a
module which was
imported earlier is
not allowed.
Modular
EtherNet/IP/
DeviceNet
Continue the import
with this message.
61 Select atleast one
device to proceed
with the import
If no device is
selected from the
tree
Modular
EtherNet/IP/
DeviceNet
Continue the import
selecting atleast one
device.
62 Please select the
adapter and proceed
with the import
If the adapter file is
not selected while
doing a modular
import.
Modular
EtherNet/IP/
DeviceNet
Continue the import
selecting the adapter.
63 Please select
atleast one IO
module and proceed
with the import!
If none of the
modular IO files is
selected from the
tree while doing a
modular import.
Modular
EtherNet/IP/
DeviceNet
Continue the import
selecting atleast one
IO file.
64 Something has been
changed in the
parameter
definition dialog.
Are you sure that
you will discard
This message
shows to the user to
select "Ok" or
"Cancel" to the user
to intimate him that
some changes are
happen in the
Parameter Edit GUI.
EtherNet/IP/
DeviceNet
Continue the import
with this message by
selecting "ok".
Table 41. Messages - Import of EDS Files (Continued)
Sl
No
Message Reason
Applicability
Based on Device
Classification
Additional
Information and
Workaround