ABB AC 800M

Appendix A Troubleshooting EDS File
9ARD000014-600 A 241
75 The default value
is no longer in the
enum values,
therefore it will
automatically be
changed into
nearest value
When the default
value of the
parameter is not
available in the
range values.
EtherNet/IP/
DeviceNet
Continue the import
with this message.
76 Maximum number of
entries is reached
When the number
of the entries
exceeds the total
number of
maximum number
of the values for the
enum and enum
range parameters.
EtherNet/IP/
DeviceNet
Continue the import
with this message.
77 This will delete
all the existing
channels!
To create the
channels based on
the selection
EtherNet/IP/
DeviceNet
Continue the import
with this message.
78 Out of Range When the value
entered is not in the
range of the
minimum and
maximum value.
EtherNet/IP/
DeviceNet
Continue the import
with this message.
79 All channels
created for this
tag will be lost,
Do you want to
proceed?
When datatype is
changed for the tag
in Class 3 for PLC
device type.
EtherNet/IP Continue the import
with this message.
Table 41. Messages - Import of EDS Files (Continued)
Sl
No
Message Reason
Applicability
Based on Device
Classification
Additional
Information and
Workaround