ABB AC 800M

Appendix A Troubleshooting EDS File
240 9ARD000014-600 A
70 The value entered
already exists
When the value
entered is already
existing in the range
values for
enumrange
parameter
EtherNet/IP/
DeviceNet
Continue the import
with this message
after specifying valid
range value for the
parameter.
71 Value is not within
Min and Max range
When the value
entered is not in the
minimum and
maximum range for
the enumrange
parameter.
EtherNet/IP/
DeviceNet
Continue the import
with this message.
72 This is not a valid
Link path entry
When the link path
is according to the
Epath syntax.
EtherNet/IP/
DeviceNet
Continue the import
after specifying a valid
link path value for the
parameter.
73 Out of Range When the value
entered is in the
audiotape range in
minimum, maximum
and default values.
EtherNet/IP/
DeviceNet
Continue the import
after specifying a valid
datatype value for the
parameter.
74 invalid entry When the value
entered is not
having valid ASCII
characters.
EtherNet/IP/
DeviceNet
Continue the import
with this message.
Table 41. Messages - Import of EDS Files (Continued)
Sl
No
Message Reason
Applicability
Based on Device
Classification
Additional
Information and
Workaround