ABB ACS180 - Page 254

254 Parameters
45.04 Saved energy Energy saved in kWh compared to direct-on-line motor
connection.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.0…214748364.7
kWh
Energy savings in kWh. 1 = 1 kWh
45.05 Saved money x1000 Displays the monetary savings in thousands compared to
direct-on-line motor connection. This parameter is
incremented when parameter 45.06 Saved money rolls
over.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0…4294967295
thousands
Monetary savings in thousands of units. 1 = 1 unit
45.06 Saved money Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
When this parameter rolls over, parameter 45.05 Saved
money x1000 is incremented.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.00…999.99 units Monetary savings. 1 = 1 unit
45.07 Saved amount Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(45.14 Tariff selection).
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0.00… 21474836.47
units
Monetary savings. 1 = 1 unit
45.08 CO2 reduction in
kilotons
Reduction in CO
2
emissions in metric kilotons compared
to direct-on-line motor connection. This value is
incremented when parameter 45.09 CO2 reduction in tons
rolls over.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0…65535 metric
kilotons
Reduction in CO
2
emissions in metric kilotons. 1 = 1 metric
kiloton
45.09 CO2 reduction in tons Reduction in CO
2
emissions in metric tons compared to
direct-on-line motor connection. This value is calculated
by multiplying the saved energy in MWh by the value of
parameter 45.18 CO2 conversion factor (by default, 0.5
metric tons/MWh).
When this parameter rolls over, parameter 45.08 CO2
reduction in kilotons is incremented.
This parameter is read-only (see parameter 45.21 Energy
calculations reset)
-
0.0…999.9 metric tons Reduction in CO
2
emissions in metric tons. 1 = 1 metric
ton
No. Name/Value Description Default
FbEq 16
ACS180 FW.book Page 254 Tuesday, March 9, 2021 2:25 PM