ABB ACS310 - Page 114

114 Application macros
Note: The default slave address of the drive is 2 (parameter 5302 EFB STATION ID),
but if several drives are used, the address must be unique for each drive.
5304 EFB PARITY 1 (8 NONE 1)
5305 EFB CTRL PROFILE 2 (ABB DRV FULL)
5310 EFB PAR 10 101
5311 EFB PAR 11 303
5312 EFB PAR 12 305
Parameter Default value
Aotewell Ltd
www.aotewell.com
Industry Automation
HongKong|UK|China
sales@aotewell.com
+86-755-8660-6182