118 Program features
Output signals Output signals Selecting the signals
indicated through relay output RO1 and, if
the MREL relay output extension module is
in use, RO2…RO4.
Group 14 RELAY
OUTPUTS
Selecting the signals indicated through
analog output AO
Setting the minimum, maximum, scaling
and inversion
Group 15 ANALOG
OUTPUTS
Timed functions Setting the timed functions Group 36 TIMED
FUNCTIONS
Selecting the timed start/stop control for
external control locations EXT1 and EXT2
1001, 1002
Selecting timed EXT1/EXT2 control 11 02
Activation of timed constant speed 1 1201
Selecting timed function status indicated
through relay output RO1 or, if the MREL
relay output extension module is in use,
RO2…RO4
1401…1403, 1410
Selecting timed PID1 parameter set 1/2
control
4027
Selection between different internal
(constant) set points for the process PID
control (PID1 parameter set 1)
4039
Selection between different internal
(constant) set points for the process PID
control (PID1 parameter set 2)
4139
Selecting timed Autochange control 8126
Name Description Set parameters
To Next Page
Loading...
