124 Electrical installation
DI5 as frequency input
For setting the parameters for the digital frequency input, see ACS580 standard
control program firmware manual (3AXD50000016097 [English]).
DI6 as PTC input
If DI6 is used as a PTC input, see ACS580 standard control program firmware
manual (3AXD50000016097 [English]) for how to set parameters accordingly.
Note: If DI6 is used as PTC input, the wiring and the PTC sensor need to be double
isolated. Otherwise the CMOD-02 I/O extension module must be used.
10
18
1)
One to six PTC thermistors connected in series.
1)
PTC IN
PTC IN
To Next Page
Loading...
