ABB ACS580-01 - Install the Cable Box, Frames R1

58 Mechanical installation
4. Position the drive onto the bolts on the wall.
5. Tighten the bolts in the wall securely.
 Install the cable box, frames R1…R2
6. Remove the screw (6a) and lift the cover off (6b) from the separate cable box.
7. Attach the cable box cover to the front cover.
8. Install the cable box to the frame. Position the cable box (8a) and tighten the
screws (8b).
4a 5 4b
×4
6a
6b
8b
8b
6 7 8
8a