ABB ACS580-01 - Unpacking and Examining Delivery, Frames R6

52 Mechanical installation
Unpacking and examining delivery, frames R6…R9
The figure below shows the layout of the transport package. Examine that all items
are present and there are no signs of damage. Read the data on the type designation
label of the drive to make sure that the drive is of the correct type. See section Type
designation label on page 38.
1 Cable box. Power and control cable
grounding shelves in a plastic bag,
assembly drawing.
Note: The cable box is mounted to the
IP55 drive module frame at the factory.
2 Drive with factory installed options.
3 Cardboard box
4Straps
5 VCI bag for protecting against corrosion
6Pallet
7 Stopper
8 Option tray
9 In the option tray
• Multilingual quick installation and start-
up guide
• User’s manual (if ordered with a plus
code)
• Multilingual residual voltage warning
stickers
10 Control panel selected in the order (in a
separate package) in the option tray
11 Possible options in separate packages, if
they have been ordered with a plus code,
such as for example +K457 (FCAN-01
CANopen adapter module) in the option
tray.
US: Options are installed at the factory.
12 Mounting template on top of the option
tray
Note: Hood included with option +B056
(IP55/UL Type 12) in North America
1
2
3
7
5
4
6
8
9 10 11
12